The open-type rotary screen printing machine is equipped with a pneumatic screen frame clamping device during the work process. They only clamped the sides of the frame. It is equipped with a positioning pin registration system, which helps to speed up the alignment of the screen on the printing machine. Licheng Flat Screen Printer Factory is here to introduce you to this area of expertise.
The size of the screen frame determines the area of the screen that the printing machine can accept. If this automatic printing machine does not support the size of the screen frame you are currently using, it must be changed to a new screen frame, so the waste is very large. So pay attention to the model of the machine, and be sure that the frame can be switched freely between sizes.
The cycle speed of an open rotary screen printing machine may be a factor to be paid attention to when buying a printing machine. The larger cycle speed refers to the output of the printing machine in one hour when one or two workers operate. Some printing machines can print hundreds of clothes per hour, and some can print more than 1,000 clothes. In fact, the actual cycle speed depends on how many flash drying processes are in your workflow, whether the paste can reach the surface dry in a very short time, and also related factors such as printing paste, printing area, fabric and so on.
The open rotary screen printing machine has a wide range of control systems, ranging from analog control panels to touch-screen based micro-processing systems. Each print head has independent control components for fine-tuning to make high-end products. Some models allow the operator to store and recall the set values of the prints, which can greatly reduce the setting time when repeating orders. The general printing machine is also equipped with a network connection solution that allows manufacturers to access the control system and troubleshoot remotely.
Some basic factors to consider when purchasing an Open Type Rotary Screen Printing Machine: color number and station automatic garment printing machine has 24 stations in six colors and 32 stations in 6 colors can be customized The position of the automatic printing machine is usually 6 more than the number of colors to facilitate the laying and taking of the film. Some configurations are specially designed for operation by an operator, and only one more workstation is installed to lay and take films. When deciding how many stations you want, you must consider the need for flash curing stations.
Pneumatic, electromechanical transmission and servo mechanical transmission are all common types in the operation of automatic printing machines. Some printing machines use one type of transmission, while others have a combination of multiple transmission methods. The pneumatic system uses compressed air to make the pressure of the printing machine scraper and ink return knife adjustable, and the solenoid valve can control the speed and movement distance. Printing machines with strict pneumatic transmission systems are usually cheaper than those using electromechanical transmission or servo mechanical transmission.